ReadMe Notes for IBM C Set ++ Demo Disk
---------------------------------------------------
Version 4.1                  9 Aug 1993



HARDWARE REQUIREMENTS:
---------------------------------------------------

IBM PC,XT,AT,286,386,486,PS/2 or compatible
VGA graphics adapter
2.9 MB free space on hard disk
(Sound Blaster sound card optional)

---------------------------------------------------


This demo runs under DOS 3.3 or higher and
OS/2 2.0 or higher.  Do not run from Windows.

To view the demo, you must install it onto your
hard disk.  There are two separate install
files, one for DOS and one for OS/2.  (See
installation notes below.)



SOUND
---------------------------------------------------

The demo's sound track may be played through
a Sound Blaster card (DOS and OS/2), or through
your PC's internal clicker speaker (DOS only).

Because the demo uses special DMA drivers to play
sound in the OS/2 environment, only Creative Labs
Sound Blaster cards are fully supported.  Some
otherwise compatible sound cards will not function
with this driver and are not recognized by the demo.

For the demo to detect your Sound Blaster card,
your AUTOEXEC.BAT file must be correctly configured
with a SET BLASTER= environment variable.  See your
Sound Blaster manual, or call Creative Labs at
408-428-6622 for technical assistance.

Sound is available through the PC's clicker speaker
when running from native DOS only.  OS/2 users with
dual boot setups may want to switch over to their
native DOS boot to hear the demo's sound track.
(Refer to your OS/2 Installation manual for
instructions.)



DOS INSTALLATION:
---------------------------------------------------

1. Insert the disk into a floppy drive.

2. Change the DOS prompt to that drive (A: or B:).
   Example: Type A: and press [ENTER]

3. Type INSTALL, and press [ENTER].

4. Follow the on-screen instructions.

When the installation is complete, type DEMO and
press [ENTER] to start the demo.

NOTE: Microsoft Windows has an adverse effect on
the demo's animation timing.  For best results,
run the demo from DOS, not from Windows or a DOS
shell running under Windows.



OS/2 INSTALLATION:
---------------------------------------------------

1. Insert the disk into a floppy drive.

2. Open the floppy icon view for that drive.

   Example: Double-click on the Drives icon in
            the OS/2 System folder.  Then double-
            click on the drive icon (A: or B:)
            that contains the demo install floppy.

3. Double-click on the OS2INST.CMD icon.

4. Follow the on-screen instructions.

When the installation is complete, double-click on
the Magic of C Set ++ icon that was added to your
desktop to start the demo.

NOTE: Once the demo is finished, if you answer yes
to the "Erase demo files from disk?" question, you
will also need to manually delete the Magic of
C Set ++ icon from your desktop. (Right-click on the
icon and select Delete from the pop-up menu).  Also
delete the \CSETDEMO directory from your hard disk.


           ### End of ReadMe file ###
