
	To install the ALi IDE device driver, the OS/2 DDINSTAL utility
	is used.  Please follow the instructions below :

       1:  insert the device driver floppy into floppy drive A
       2:  use mouse to execute the DDINSTAL utility
       3.  click the 'Change' under the 'Source directory'
       4.  Select the A:\OS2 directory and click 'Set'  
       5:  click the 'Install ...'
       6:  if you are installing over the OS/2 V2.x,    
		  select the 'ALI IDE Device Driver for OS/2 V2.x'
	   if you are installing over the OS/2 V3.0,    
		  select the 'ALI IDE Device Driver for OS/2 V3.0'
       7:  click the 'OK'
       8:  click the 'EXIT' to exit from the DDINSTL utility
       9:  restart the OS/2 system

!!!! Notice !!! 
   1.After the installation of ALi IDE driver, please remark the original
     OS/2 IDE driver in CONFIG.SYS.
     ie.  In file Config.sys, please change the line :
	BASEDEV=IBM1S506.ADD
	to                      
	REM BASEDEV=IBM1S506.ADD

   2.The parameter '/CLK:' for ALI.ADD indicates the Bus Speed of your 
     computer.  Change this parameter to a proper value so that you can 
     get the best performance of your IDE devices.      
