BTSCSI.EXE Package

This package contains the driver to support the BusLogic SCSI 
Adapters.

This function is tracked internally by IBM as:
       OS/2 Defect 169961 and APAR JR23516.

The files contained in this package are:

1. BTSCSI.ADD
        Replacement ADD driver

2. BTSCSI.DDP
        Device Driver Installation Profile

3. README.TXT
        This readme.

-------------
Support status
-------------

Support is provided by IBM via our normal service and support
channels.  Please check our on-line DDPAK web site
(http://www.service.software.ibm.com/os2ddpak/) for new packages or
new information.

-----------
Installation:
-----------

Install via Device Driver Install.

Unpack this driver by executing the self extracting zip file by
copying the file BTSCSI.EXE to a directory and then open an OS/2
Window and type at the command prompt BTSCSI.  This will unzip the
package into the current directory.  If you want to save the old
levels of the driver, rename the original version.

Then use the Device Driver Install program in the OS/2 System
Folder/System Setup Folder.  (In Warp 4, Device Driver Install is
found in the OS/2 System/System Setup/Install-Remove Folder).  Point
the Device Driver Install file dialogue to the directory that you
unzipped the files into.


Driver Updates for 11/14/96

1. Fix to work with IOMEGA filter driver.  Autosense disable was not
   working properly.

2. Enhanced reset handling.

3. Queue requests during resets.

4. Previously polled commands in BTSCSI initialization now handled
   through the interrupt handler.  This was causing problems with
   certain revs of BT946.
